Electrically heated mixing tank 

 Mixing tank by the composition of the pot, pot, blender, electric heating oil pinch, support and gear, the shaft seal device, spill ducts, and is equipped with electric heating rods and temperature measurement, pressure measurement table. 
 Users due to the production process, operating conditions are different, stirring to form generally anchor, paddle, turbine-propelled or box type. Bearing in suspension or support two kinds. 
 Conducting oil jacket is placed by the electric heating rods, jacket open into the oil discharge, overflow measuring, venting and electric rods, temperature, etc. take over the hole. The jacket outer wall welding bearing, the bottom of the pot to open the discharge port. 

 Agitator selection step analysis introduced 
 The mixing device design and selection are closely integrated with stirring operating purposes. Various mixing process run by the mixing device to achieve the purpose and requirements of the mixing operations must first selection in the design according to the process to determine the agitator type, motor power, stirring speed, and then select the reducer machine frame, shaft, shaft seal parts. Total concrete steps are as follows: 
 In accordance with the process conditions, the mixing purpose and requirements, select the agitator type, select the type of agitator should flow state with a variety of mixing the purpose of the causal relationship between the features and stirrer to fully grasp the power of the stirrer in the mixing process. 
 In accordance with the type of the stirrer and stirrer in the mixing process generated by the flow state, the process of mixing the mixing time, settling velocity dispersion control requirements through the design of experimental methods and computer simulations to determine the motor power, stirring speed of the stirrer diameter. 
 In accordance with the motor power, stirring speed and process conditions selected from the reducer selection table to determine the speed reducer models. If the torque on the actual work to select the reducer, the actual torque should be less than the permissible torque of the reducer. 
 (4) in accordance with the specifications of the output shaft of the reducer head d and stirring shaft bearing mode selection, d same model rack, coupling 
 Stirring shaft head do dimensions in accordance with the rack installation to accommodate the space and the working pressure, operating temperature to select the shaft seal type 
 In accordance with the installation form and structure requirements, design choices stirring shaft structure type, and the school to review its strength, stiffness. Rigid shaft design, the strength conditions are met n / nk ≤ 0.7; such as the flexible shaft design strength conditions are met n / nk> = 1.3